Aluminum Products
Prefinished Aluminum Sheet Metal
Wieland-Wrisco is a national manufacturer and distributor of prefinished aluminum sheet and coil, offering over fifty colors, a full range of gauges, and the largest ready-to-ship inventory of prefinished aluminum in the industry. Painted, anodized, mill finish, Fluropon 70% PVDF, coil coated, and tread brite sheet are all processed from mill-direct aluminum coil on Wieland-Wrisco’s own computerized cut-to-length lines, then leveled, sheeted, blanked, and slit in-house.
What’s the difference between painted, anodized, and mill finish aluminum sheet?
All three start from the same aluminum coil; the difference is what happens to the surface.
- Prepainted (painted) aluminum gets a hard, abrasion-resistant paint system that still flexes for forming and fabricating. Wieland-Wrisco is a national distributor of painted aluminum sheet, including Fluropon 70% PVDF finishes for superior exterior durability, color consistency, and resistance to pollutants.
- Anodized aluminum goes through a two-step continuous coil anodizing process (not batch anodizing), which gives a consistent color from edge to edge. It won’t chip, peel, or flake, and it’s more abrasion and corrosion resistant than painted finishes.
- Mill finish aluminum ships as it comes off the mill, with no applied finish. It’s one of Wieland-Wrisco’s top sellers because it costs less to produce and is ideal for fabrication and custom paint finishing down the line, whether you’re building signage, trim, or a custom-painted end product.
What colors and finishes are available?
Wieland-Wrisco stocks more than fifty colors and finishes, including Prefinished Painted Aluminum, Anodized, Fluropon 70% PVDF, Mill Finish, Coil Coated Aluminum Sheet, and Aluminum Tread Brite. Nonstock custom color painting is available for larger orders; call for mill minimums. See the Wieland-Wrisco Aluminum Stock Chart for current stock finishes, colors, gauges, and widths, and request a Mill Certificate of Specifications for any order.
Who manufactures and distributes Wieland-Wrisco’s aluminum sheet?
Wieland-Wrisco has been supplying aluminum sheet and coil for over 100 years, operating as both a manufacturer and a distributor from divisions across the U.S. Sheets are sold in an extensive range of standard stock sizes and gauges, with special width and length requests welcomed. Whether you’re buying direct or through a distributor relationship, every order runs through the same computerized cut-to-length lines and the same tolerance standards.
| Finish | Notes |
|---|---|
| Prepainted / Painted | Hard, abrasion-resistant coating; Fluropon 70% PVDF available for max exterior durability |
| Anodized | Two-step continuous coil process; clear, bronze, gold, black in stock |
| Mill Finish | No applied finish; lowest cost; base for custom paint finishing |
| Coil Coated | Continuous coil coating for large-volume orders |
| Tread Brite | Diamond-pattern anti-slip surface, .025″-.125″ gauges |
Color-Coated (Prepainted) Aluminum Sheet
Color-coated aluminum sheet, also called prepainted or painted aluminum sheet, is coated on a continuous coil line before it’s cut to size, so every sheet has the same consistent color. Wieland-Wrisco stocks more than fifty colors, including whites, blacks, and bronzes, plus Fluropon 70% PVDF finishes for maximum exterior durability. The paint system is hard and abrasion resistant but still flexible enough for forming and fabrication, and nonstock custom colors are available for larger orders.
Standard Aluminum Sheet Sizes and Gauges
Stock aluminum sheet commonly ships in 48″ x 96″ and 48″ x 120″, with cut-to-length sizes available on request. Gauges run from thin .020 sheet up to .125 tread brite depending on the finish; the current Aluminum Color Chart and stock chart list what is in stock by color and gauge. For help choosing a thickness, see the aluminum gauge thickness guide.
Where to Buy Aluminum Sheets
Wieland-Wrisco ships aluminum sheet nationwide from five divisions: Atlanta, Dallas, Carol Stream (Chicago area), Parsippany (New Jersey), and Ontario (California). See all aluminum sheet supplier locations for addresses and phone numbers.
Frequently Asked Questions
What gauges does Wieland-Wrisco stock aluminum sheet in?
Stock gauges and widths vary by finish; the current Aluminum Stock Chart lists exact sizes. Special width and length requests are welcomed for non-stock needs.
Can I get a Mill Certificate of Specifications?
Yes, a Mill Certificate of Specifications is available on request for any order.
Does Wieland-Wrisco offer custom colors?
Yes, nonstock custom color painting is available. Call for mill minimums and lead time details.
What other metals does Wieland-Wrisco supply besides aluminum?
Wieland-Wrisco also supplies architectural copper, stainless steel, and painted steel sheet and coil.
Where can I buy aluminum sheets?
Wieland-Wrisco sells prefinished aluminum sheet and coil nationwide from divisions across the U.S., in standard stock sizes or cut to your width and length. Call or use the contact form for pricing and availability.
What is color-coated aluminum sheet used for?
Signage, building trim and fascia, soffit, storefronts, trailers, and any project that needs a durable, consistent color without painting after fabrication.
How thick is aluminum sheet metal?
Most prefinished aluminum sheet falls between .020 and .080 inch, and tread brite runs up to .125 inch. The right gauge depends on the job: thinner gauges for signs and trim, heavier gauges for panels and trailers.
Is there a Wieland-Wrisco location near me?
Wieland-Wrisco has divisions in Atlanta, Dallas, Carol Stream (Chicago area), Parsippany (New Jersey), and Ontario (California), and ships nationwide from all of them.
